Bearded dragon · Setup checklist

What supplies do I need for a bearded dragon?

Bearded dragon care begins with a tested adult habitat. The checklist below covers what you need to measure, maintain, and transport safely.

Every item should support the measured adult routine. Decorations cannot replace reliable controls or adequate space.

Use the practical checks
Adult bearded dragon in a finished habitat beside organized lighting, climate controls, dishes, feeding tools, a scale, and a carrier.

The short answer

Spend first on the home, controls, and backup plan for bearded dragons

Bearded dragon care begins with a tested adult habitat. The checklist below covers what you need to measure, maintain, and transport safely.

Adult home
At least 120 × 60 × 60 cm (48 × 24 × 24 in) for one adult; larger usable floor space is welcome
Warm zone
RSPCA bright-end basking zone 38–42°C (100–108°F); RVC guidance 35–40°C (95–104°F)
Cool and night
Cool shaded end 22–26°C (72–79°F); All lights off; controlled non-light heat if needed to stay at least 20–22°C (68–72°F)
Humidity
Low ambient humidity around 30–40%, measured with a hygrometer and supported by good ventilation
UVB
High-output linear UVB with a measured UVI gradient of 3.0–5.0 at the basking zone down to zero in shade
Food
An age-adjusted mix of varied safe greens and gut-loaded, supplemented captive-bred invertebrates

The honest fit

Would the adult routine work in your home?

Do this

  • Buy and test the adult enclosure before adoption.
  • Keep backup batteries, replacement dates, a carrier, and vet details.
  • Keep fresh water and monitor bearded dragon behavior every day.
  • Record changes so a reptile veterinarian receives useful evidence.

Avoid this

  • Do not rely on an undersized all-in-one starter kit.
  • Do not spend the safety budget on decorative extras first.
  • Do not copy another reptile species' setup.
  • Do not treat a persistent health change as a shopping problem.
01

Build the adult home first

Start with the species adult minimum shown above. Add secure doors, ventilation, stable cover, and usable routes before choosing decorative plants or substrate.

The enclosure should be fully assembled and running before adoption. That week of testing reveals weak locks, unstable branches, unreachable cleaning areas, and climate equipment that cannot hold the target range.

Adult central bearded dragon climbing onto broad cork with its bright eye, natural beard, sturdy legs, and long tail clearly visible.
02

Measure every life-support system

Use the correct thermostat for each heater, separate warm and cool thermometers, a hygrometer, plug timers, guarded heat, and measured high-output linear UVB.

Keep spare batteries and the lamp's replacement date with your records. A handheld infrared thermometer can help spot-check surfaces, but it does not replace fixed air-temperature probes.

Adult central bearded dragon crossing a bright basking ledge toward a shaded stone retreat.
03

Prepare food, cleaning, and transport

Set aside species-appropriate food tools, supplement storage, a gram scale, reptile-safe disinfectant, paper towel, a secure ventilated carrier, and the reptile veterinarian's contact details.

Keep reptile bowls, tongs, cloths, and waste equipment separate from human kitchen items. A complete setup includes money and a plan for replacement lamps, failed controls, veterinary visits, and safe transport.

Keep deciding

See the complete care picture

Sources and further reading